Ask anything about EZ Template. Enter your robot's configuration below and every code answer will use your actual motor ports and wheel specs — not generic placeholders.
⚠ RECF EN4 — AI use notice
This tool is for informational and learning purposes only. Any code or explanation produced is a thinking prompt, not content to paste into your project. RECF rule EN4 prohibits using AI to generate, organize, enhance, or alter engineering-notebook content or programming code — teams have been disqualified for copy-pasting AI output. Read the answer, understand it, then write the code yourself.
⚙ Your Robot Config click to expand▼
How do I tune my drive PID?
Set up the auton selector with 3 routines
Make the robot turn 90° then run the intake
What does pid_wait_quick_chain do?
How do I add odometry tracking wheels?
My robot overshoots turns. How do I fix it?
🤖
Hi! I'm your EZ Template assistant. I know the full EZ Template library — chassis setup, PID tuning, auton selector, odometry, exit conditions, PTO, and more.
Enter your robot config above and I'll use your actual motor ports in every code example. What do you need help with?
📖
OFFICIAL EZ TEMPLATE DOCUMENTATION
For the full API reference, tutorials, and example project
⚙ STEM HighlightComputer Science: Large Language Models as Engineering Tools
AI coding assistants apply transformer-based language models trained on code corpora to predict contextually appropriate outputs. The model predicts the most likely next token given context — it does not reason about physical accuracy. AI-generated robot configurations require engineer verification against physical hardware. The model knows the EZ Template API; it cannot know your robot's actual port wiring.
🎤 Interview line: “We use the EZ Assistant as a starting point, not a final answer. It generates the chassis constructor template with correct API structure — but we verify every port number against our physical wiring before uploading. AI tools accelerate configuration from 20 minutes to 5 minutes, but the engineer still owns the verification step.”
The EZ Assistant generates a chassis constructor for your robot. What must you do before uploading?
⬛ Upload immediately — AI-generated config code is correct by design
⬛ Verify every port number matches your physical wiring and test drive direction before running any autonomous
⬛ Ask the assistant to verify its own output
📝
Notebook entry tip:Build & Program — Orange slide — Document significant AI-assisted coding decisions in your programming log: what you asked, what it generated, what you changed and verified, and what the final code does. RECF EN4 prohibits AI-written notebook content — but logging that your team used AI tools and understood the output demonstrates honest and mature engineering practice.